2011년 3월 7일
릴리즈 노트 - 읽어보기 파일
Autodesk, Inc.
Autodesk는 고품질의 제품을 제공하려는 노력의 일환으로 Autodesk Inventor 2012를 출시했습니다. 이 파일은 알려진 중대 미해결 문제를 중점적으로 설명하고 Inventor 사용 시 도움이 될 수 있는 정보를 제공합니다.
디스크 요구사항 - Autodesk Inventor 2012
Inventor 2012는 Windows XP 32비트 SP3, Windows XP 64비트 SP2, Windows Vista 32비트 SP2, Windows Vista 64비트 SP2, Windows 7 32비트 및 Windows 7 64비트를 지원합니다.
시스템 | 필요한 실제 디스크 용량 |
Windows XP x32 SP3 | 2.4GB |
Windows XP x64 SP2 | 3.2GB |
Windows Vista x32 SP2 | 3.2GB |
Windows Vista x64 SP2 | 3.7GB |
Windows 7 x32 | 2.3GB |
Windows 7 x64 | 2.7GB |
Desktop 컨텐츠 라이브러리 | 필요한 실제 디스크 용량 |
ANSI | 1,427MB |
DIN | 379MB |
GOST | 947MB |
ISO | 268MB |
JIS 및 GB | 658MB |
피쳐 | 3.4MB |
기타 | 1,859MB |
Parker | 50MB |
Routed System | 6.5MB |
금형 미터법 | 60MB |
판금 | 46MB |
시작하기 전...
컴퓨터에서 보류 중인 모든 Windows 업데이트를 설치한 다음 재부팅합니다.
Windows XP: 제어판에 있는 Windows Update 유틸리티를 사용합니다.
Windows 7 및 Windows Vista: 제어판과 사이드바에 있는 Windows Update 유틸리티를 사용합니다.
Windows Vista에서 Autodesk Inventor 2012를 설치하려면 Microsoft Vista SP2 핫픽스 KB971138이 필요합니다. 이 픽스에 대한 자세한 내용과 이 픽스 및 관련 Microsoft 다운로드에 액세스하는 방법은 Autodesk 기술 솔루션 16323149를 참조하십시오.
다음을 확인하십시오.
시스템에 Autodesk Inventor 2012를 설치하기에 충분한 디스크 공간이 있습니다.
Autodesk Inventor 2012의 이전 베타 버전을 설치제거했습니다.
주:Autodesk Inventor 2012와 함께 Autodesk Fusion 2012를 설치하려면 Autodesk Fusion 2012 서비스 팩 1도 설치하는 것이 좋습니다. Autodesk Inventor Fusion 2012 설치 페이지에서 작은 아래쪽 화살표를 클릭하여 구성 섹션을 확장한 후 구성 옵션과 함께 해당 서비스 팩을 선택합니다.
Autodesk Inventor 2012를 설치하려면
제대로 설치되었는지 확인하려면 Autodesk Inventor를 시작합니다. 도움말 메뉴에서 Inventor 정보를 선택합니다. 정보 상자에 빌드: 160, 릴리즈: 2012가 표시되면 설치가 성공적으로 완료된 것입니다.
Autodesk는 Autodesk Inventor 2012 베타 버전을 사용하여 작성했거나 저장한 파일의 변환을 지원하기 위해 모든 노력을 다하고 있습니다. 그렇지만 이러한 파일이 최종 Autodesk Inventor 2012 베타 3 릴리즈에서 작성되지 않았다면 이 Autodesk Inventor 2012 릴리즈 버전 또는 후속 릴리즈로의 변환을 보장할 수는 없습니다.
직접 변환기가 지원하는 파일 버전
변환기 | 가져오기 | 내보내기 |
Alias | v10 이상 | |
CATIA V4 | 전체 리비전 | |
CATIA V5 | R6~R20 | R10-R19 |
IGES | 전체 리비전 | 5.3 |
JT | 7.0; 8.0; 8.1; 8.2; 9.0; 9.1; 9.2; 9.3; 9.4 | 7.0; 8.0; 8.1; 8.2; 9.0; 9.1; 9.2; 9.3; 9.4 |
NX | 3~7.5 | |
Parasolid | 23.0 이하 | 9.0~23.0 |
Pro/ENGINEER | Wildfire 5.0 이하 | |
Pro/ENGINEER 그래니트 | 6.0 이하 | 1.0-6.0 |
Pro/ENGINEER 중립 | 해당 없음 | 해당 없음 |
Rhino | 4.0 이하 | |
SAT | 7.0 이하 | 4.0-7.0 |
SolidWorks | 2003-2010 | |
STEP | AP214, AP203E2 | AP214, AP203E2 |
STL | 해당 없음 | |
XGL/ZGL | 해당 없음 |
사용된 약어:
다이나믹 시뮬레이션
프레임 분석
응력 해석
금형 설계
튜브 및 파이프
케이블 및 하네스
API
도면 관리자
향상된 시각화
프레임워크
도움말 및 학습 솔루션
부품 모델링
복구 환경
변환기
현지화된 언어용 Inventor Lite 도움말
Notwithstanding the terms contained in the terms and conditions and the Autodesk Software License Agreement (EULA) accompanying this software, if you received this Software as a New Version or Cross grade (all as defined in the EULA), your license with respect to the previously licensed version of Autodesk Mechanical Desktop software ("Mechanical Desktop") shall not terminate, you shall have no obligation to uninstall such software and you may continue to use such Previous Version of Mechanical Desktop with your current version of Autodesk Inventor software.
Autodesk Inventor, Autodesk Vault, Autodesk Data Management Server, Autodesk Productstream, Autodesk Autoloader, AutoCAD, AutoCAD Mechanical, Mechanical Desktop, and AutoCAD Electrical, are trademarks or registered trademarks of Autodesk, Inc. in the United States and/or other countries.
Windows 2000, Windows 2003 Server, Windows 2000 Server, Windows XP, Windows Vista, Windows 7, Microsoft Office XP, Microsoft Office 2000, Microsoft Office 2003, Microsoft Office 2007, Microsoft Word, Microsoft PowerPoint, and Microsoft Excel are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Portions of this software copyright 1996-2008 Acresso Corporation.
All other trademarks are the property of their respective owners.
이러한 문제를 발견하여 저희에게 알려주신 모든 고객분들께 감사드립니다. 이러한 보고를 통해 저희는 제품을 개선하고 최상의 기계 설계 솔루션을 제공할 수 있는 기회를 가질 수 있습니다. 또한 여러분의 끊임없는 성원과 본 업데이트 릴리즈의 내용에 관한 피드백도 주실 것을 당부드립니다.
감사합니다.
Autodesk Inventor 제품 팀
Copyright © 2011 Autodesk, Inc.